Mosaic and terrazzo are often grouped together because both can create a small-format or aggregate-rich surface, but they behave differently in a project. Confirm what the product is made from, how it is mounted, where it can be installed and how the finished surface will be maintained.
Ask whether the surface is ceramic, porcelain, glass, natural stone, cement-based terrazzo or another composite. Record the module, sheet backing, thickness, edge, shade variation and recommended adhesive. A catalogue name is not enough to specify the complete system.
Small pieces still need a full layout. Show the sheet repeat, perimeter cuts, niches, drains, corners and changes of direction. Confirm whether the joints line up with the visible grout or are hidden by the sheet backing. Keep spare sheets from the same batch for later repairs.
| Decision | What to check |
|---|---|
| Substrate | Flatness, moisture, movement, membrane and load |
| Surface | Slip, pores, aggregate, finish, sealing and staining |
| Installation | Sheet alignment, adhesive, grout, curing and edge detail |
| Care | Cleaning chemistry, resealing, patching and replacement pieces |
View several sheets under the project lighting and inspect the grout colour. Terrazzo and natural-looking products can vary from one batch to another; a single tile may not show the distribution of aggregate or the amount of visual repetition.
They can speed alignment, but the backing, sheet repeat, cuts and joints still need careful setting out.
The requirement depends on the exact composition and finish. Follow the product documentation.
Only when the selected product, slip information, adhesive, grout and waterproofing system suit that exposure.
Evidence boundary: Exact product suitability, Australian requirements, pricing and installation responsibility depend on the selected system and project. Check current manufacturer documents and obtain advice from the relevant Australian building professional before approval.
Send the product code, sheet size, room plan, drain details and preferred finish through the Forge contact page.
Choose ceramic tiles by comparing location, water exposure, slip, finish, dimensions, installation, cleaning and Australian project requirements.
2026-08-28
Choose tile colours by testing undertone, light, room size, grout, variation, fixed finishes, maintenance and full-size samples together.
2026-09-03
Choose bedroom tiles by weighing thermal feel, acoustics, slip, cleaning, underfloor heating, layout and coordination with furniture.
2026-09-07
Evaluate bathroom tiles australian selection guide for Australian projects by checking intended use, product evidence, dimensions, installation, maintenance.
2026-09-11
Evaluate Kassa products Australia for Australian projects by checking intended use, product evidence, dimensions, installation, maintenance, delivery and supp.
2026-09-15
Calculate tile sizes and coverage from measured areas, openings, layout, cuts, carton rounding, waste and labelled spare stock.
2026-09-19
